CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.
What is CARB Phase 2 Compliant?
CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.
Brilliant White Shaker
Ships in 2-4 weeks
Accident Protection Warranty For Your Entire Kitchen! Learn More!
The Brilliant White Shaker pre-assembled cabinet collection offers a fresh, crisp, and clean look to any kitchen. The bright white finish will surely lighten the kitchen space and add a modern touch to your home. These cabinets are full overlay doors and come with beautiful dovetail drawers and soft closing drawer features.
Â
Please note that items from pre-assembled collections are not able to be returned, for more information, please see our FAQ page. We strongly encourage all customers to order a refundable sample door prior to purchasing.
This finish is available in both Pre-Assembled and Ready to Assemble
| Shipping Time: |
Ships in 2-4 weeks |
| Style: | Shaker |
| Face Frame: | 3/4" x 1-3/4" Birch |
| Door Frame: | Premium HDF (HDF is used to avoid cracking/warping) |
| Door Center: | Premium HDF(HDF is used to avoid cracking/warping) |
| Door Frame Width: | 2.75" |
| Center Panel Beveled Edge: | Yes |
| Sides: | 1/2" A-Grade plywood |
| Top & Bottom (Wall): | 1/2" A-Grade plywood |
| Bottom (Base): | 1/2" A-Grade plywood |
| Back Panel: | 1/2" A-GradePlywood Full Back |
| Shelves: | Adjustable 3/4" w/Front Edge Banding |
| Base Cabinet Shelf Depth: | 1/2 |
| Drawer Box: | 5/8" solid hardwood, dovetailed drawer box, 5/16" Plywood Drawer Box Bottom, 5-Piece drawer front construction |
| Drawer Glides: | Undermount, Full Extension, Soft Close Glides |
| Base Corner Supports: | 3/4" Solid Wood Corner Blocks |
| Overlay: | Full |
| Hinges: | 6-way Adjustable, Concealed, European Soft Close Hinges |
| Cabinet Interior: | UV Coated Natural Interior(Prepped-for-glass cabinets will be finished to match the cabinet fronts) |
| Center Stile: |
None (unless listed in the cabinet description) |
| Assembly Method: | Staple from the back or pin nail from the side, exposed cabinet sides will need skins or decorative panels applied (purchased separately) to hide the pin nail holes that will be visible |
| Finish: | 7 step, acid-catalyzed finish process with a UV coating |
| Toe Kick: | 1/2" Plywood |
| Installation Rail: | None |
| Wall Cabinet Bottoms Finished (Exterior): | Yes (just bottom panel, edges of side and back panel and recessed area is unfinished) |
| CARB Compliant: | Yes |
| Door Hinges: | Please use drop down options for each cabinet to change hinging from right to left |
| Toe Kicks Included w/Base Cabinets: | Yes, but there will be a small gap when two cabinets are side by side, so the TKC (8' toe kick) is needed if cabinets are next to each other. |
| Sides Panels Finished: | Yes - please note that exposed cabinet sides will need skins or decorative panels applied (purchased separately) to hide the pin nail holes that will be visible from assembly |
| Installation/Design Note: |
The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
Wall Cabinets
Base Cabinets
Oven/Pantry Cabinets
Cabinet Accessories
Bathroom Vanities
Storage Accessories
-
View All
-
Sample Door
-
30" High Single Door Wall Cabinets
-
30" High Double Door Wall Cabinets
-
36" High Single Door Wall Cabinets
-
36" High Double Door Wall Cabinets
-
42" High Single Door Wall Cabinets
-
42" High Double Door Wall Cabinets
-
Corner and Blind Wall Cabinets
-
30”, 36” and 42” High Glass Door Cabinets
-
12", 15" and 18" High Glass Door Cabinets
-
12" Deep Small Wall Cabinets
-
24" Deep Small Wall Cabinets
-
Wall Open and Angle Cabinets
-
Wine, Glass and Plate Rack Cabinets
-
Hoods
-
Wall Cabinet Hanging Kits
-
View All
-
Single Door Base Cabinets
-
Single Door Full Height Base Cabinets
-
Double Door Base Cabinets
-
Double Door Full Height Base Cabinets
-
Drawer Base Cabinets
-
Corner and Blind Base Cabinets
-
Sink Base Cabinets
-
Base End Cabinet
-
Microwave Base Cabinet
-
File Base Cabinet
-
View All
-
Oven Cabinets
-
Pantry Cabinets
-
View All
-
Wall and Base Fillers
-
Moldings and Toe Kick
-
Panels
-
Decorative Doors
-
Valances
-
Roll Out Trays
-
Decorative Accent Pieces
-
Floating Shelves and Tray Dividers
-
Vanity or Desk Drawer
-
Pullout Trash Cabinet Accessories
-
Microwave Shelf and Wine Rack Kits
-
Lift Up Hinge and Hinge Restrictors
-
Recommended Decorative Hardware
-
Touch Up Kit
-
View All
-
Vanity Sink Base Cabinets
-
Vanity Drawer Base Cabinets
-
File Base Cabinet
-
Vanity Decorative Door
-
Vanity or Desk Drawer
-
View All
-
Filler Pull-Out Organizers
-
Base Trash Cabinet Accessories
-
Sink Base Tilt Out Trays
-
Inside Drawer Accessories
-
Inside Door Accessories
-
Inside Cabinet Accessories
Login and Registration Form