CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.
What is CARB Phase 2 Compliant?
CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.
Portland Navy Blue
Ships in 5-15 business days
Accident Protection Warranty For Your Entire Kitchen! Learn More!
The Portland Navy Blue pre-assembled cabinet collection offers a fresh, crisp, and clean look to any kitchen. The elegant, yet simple blue finish will elevate the kitchen space and add a modern touch to your home. These cabinets feature full overlay doors and come with beautiful dovetailed, soft closing drawers.
Please note that items from pre-assembled collections are not able to be returned, for more information, please see our FAQ page. We strongly encourage all customers to order a refundable sample door prior to purchasing.
This finish is available in both Pre-Assembled and Ready to Assemble
| Shipping Time: |
Ships in 5-15 business days |
| Style: | Slim Shaker |
| Face Frame: | 3/4" Solid Birch |
| Door Frame: | MDF/HDF (MDF/HDF is used to avoid cracking/warping) |
| Door Center: | MDF/HDF (MDF/HDF is used to avoid cracking/warping) |
| Center Panel Beveled Edge: | No |
| Sides: | 1/2" A-Grade plywood with wood veneer |
| Top & Bottom (Wall): | 1/2" A-Grade plywood with wood veneer |
| Bottom (Base): | 3/8" A-Grade plywood with wood veneer |
| Back Panel: | 1/2" full back |
| Shelves: | 3/4 " A-Grade plywood with wood veneer |
| Base Cabinet Shelf Depth: | 1/2 |
| Drawer Box: | Solid Wood 17mm (close to 3/4") sides, Drawer bottom 3/8" plywood, Drawer length 21". Dovetail construction, Natural finish. |
| Drawer Glides: | Undermount, full extension with soft closing feature |
| Base Corner Supports: | Wood corner brackets with wood I-beam construction |
| Overlay: | Full with butt doors |
| Hinges: | Concealed 6-way adjustable with Soft Closing Feature |
| Cabinet Interior: | Matches door finish |
| Center Stile: |
No center stile on cabinetry 24"W to 36"W |
| Assembly Method: | Steel Clip |
| Finish: | Waterborne UV Finish |
| Toe Kick: | 1/2" Plywood (sides of the toe kicks will be unfinished) |
| Installation Rail: | 1/2" Plywood |
| Wall Cabinet Bottoms Finished (Exterior): | Yes |
| CARB Compliant: | Yes |
| Door Hinges: | Hinged To The Right By Default. Please Use Drop Down Options For Each Cabinet To Change Hinging From Right To Left |
| Toe Kicks Included w/Base Cabinets: | Yes |
| Sides Panels Finished: | Yes |
| Installation/Design Note: |
The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
Wall Cabinets
Base Cabinets
Oven/Pantry Cabinets
Cabinet Accessories
Bathroom Vanities
Storage Accessories
-
View All
-
Sample Door
-
30” High Wall Cabinets
-
36” High Wall Cabinets
-
42” High Wall Cabinets
-
12" Deep Small Wall Cabinets
-
24" Deep Small Wall Cabinets
-
Corner and Blind Wall Cabinets
-
Wall Cabinets With Drawers
-
Wall End Shelf Cabinets
-
Wall Angle Cabinets
-
Wall Specialty Cabinets
-
Hoods
-
Wall Cabinet Hanging Kits
-
View All
-
Single Door Base Cabinets
-
Double Door Base Cabinets
-
Drawer Base Cabinets
-
Corner and Blind Base Cabinets
-
Sink Base Cabinets
-
Microwave Base Cabinet
-
Transition and Angle Base Cabinets
-
Base Pull Out Spice Cabinets
-
Base Trash Cabinet Accessories
-
View All
-
Oven Cabinets
-
Pantry Cabinets
-
View All
-
Fillers and Columns
-
Fluted Fillers
-
Moldings and Toe Kick
-
Panels
-
Decorative Doors
-
Valances
-
Roll Out Trays
-
Decorative Accent Pieces
-
Glass Doors
-
Pullout Trash Cabinet Accessories
-
Lift Up Hinge and Hinge Restrictors
-
Recommended Decorative Hardware
-
Touch Up
-
Floating Shelves
-
View All
-
Vanity Sink Base Cabinets without Drawers
-
Vanity Sink Base Cabinets with Drawers
-
Vanity Drawer Base Cabinets
-
Vanity or Desk Drawer
-
View All
-
Filler Pull-Out Organizers
-
Base Trash Cabinet Accessories
-
Sink Base Tilt Out Trays
-
Inside Drawer Accessories
-
Inside Door Accessories
-
Inside Cabinet Accessories
Login and Registration Form